top of page

Securing the gas network.

Safety devices for branch connections.

Cutting off an excessive gas flow downstream the device.

We offer two technical concepts compatible with most PE tubes and tapping tees in order to :

  • Protect the medium pressure network (0,5 to 5 bar / 7,25 to 72,5 psi)

  • Avoid gas leakage incidents

  • Provide safe working conditions on medium pressure networks

  • Avoid emergencies

  • Reduce the environmental impact of gas discharges on the atmosphere

BDSTOP

BDSTOP®

The solution to protect new connections.

The BDSTOP® has been designed for underground installations with digging or excavation.

      

3 product configurations :

  • BDSTOP® alone

  • MBDI®: PE connection coupler with integrated BDSTOP®

  • PBDI®: PE tapping tee with integrated BDSTOP®

          

Reset by injecting air through the pressure tap of the consumer’s valve to restore balanced upstream and downstream pressures (tight model).

Technical features of BDSTOP®.

  • Material: Body and components made of polyacetal, stainless steel spring and NBR seals.

  • Types of gas: Natural gas, manufactured gas, Propane, Propane-air mixture.

  • Operating pressure : from 0,5 to 5 bar

  • Service temperature: from -20°C to +40°C

  • Available diameters: PE 20 / PE 25 / PE 32

  • Mounting position : horizontal, within + or - 45° 

DPBE gaz

DPBE®

The solution to protect existing connections.

The DPBE® has been designed for installations above ground without digging or excavation (through the valve on the meter box).

Installation into the pipe from consumer’s valve by means of the BANIDES insertion system, without interrupting the gas supply on the service line.

Reset by injecting air through the pressure tap of the consumer’s valve to restore balanced upstream and downstream pressures (tight model).

​

* DPBE made under licence from ENGIE.

Technical features of DPBE®.

  • Material : body and components made of polyacetal, stainless steel spring, NBR seals.

  • Types of gas : natural gas, manufactured gas, Propane, Propane-Air mixture.

  • Operating pressure : from 0.5 to 5 bar / 7.25 to 72.5 psi

  • Service temperature : from -20°C to +40°C

  • Available diameters : PE 20 / PE 25 / PE 32

  • Mounting position : horizontal, within + or – 45 degrees.

  • BANIDES insertion kit needed.

bottom of page